Xtramix Front View

1. Stereo Level Control -This small inner knob is a dual rotary potentiometer that simultaneously and equally adjusts both the left and right channel levels.

2. Input Balance/Pan Control -The larger outer knob, in conjunction with the subgroup assign switches, allows an input channel to be assigned to any of eight individual subgroups or panned between any of four subgroup pairs.

3. In-Place Solo Switch - In-Place soloing allows you to isolate any stereo channel while maintaining its stereo perspective. A red LED illuminates any time its associated Solo Switch is depressed.

4. Subgroup Assign/Mute Switch -This bank of pushbutton switches, in conjunction with the input channel Balance/Pan Control, allows an input channel to be assigned to any of eight individual subgroups or any of four subgroup pairs. A channel is muted as long as it is not assigned to any subgroup.

5. Assign Changeover Switch -In the up position, the Subgroup Assign Switches will select subgroups 1 through 4. When depressed the Subgroup Assign Switches will select subgroups 5 through 8.

6. Presence of Signal LED -This LED will illuminate when a signal is present at the left or right channel. This provides for easy identification of an active signal even when a channel is unassigned (muted) and sound is inaudible.

7. Effects Stereo/Mono LED -This yellow LED illuminates when the channel's Stereo/Mono switch (on the rear panel) is depressed. This indicates that the left and right signals are being summed together creating a mono composite for the effects sends.

8. Effects Send - Odd -The smaller inner knob adjusts the level being sent to the selected "odd" effects bus. This control is used in conjunction with the Odd Effects Assign Switch (1,3,5,and 7).

	Xtramix Rear View
	The Back Panel of the Xtramix has a total of 115 input and output connections. Each of the 20 stereo input channels has Left and Right balanced TRS 1/4" input jacks, a Low/High gain select, and a Stereo/Mono select for the effects sends.

9. Odd Effect Assign Switch -When this button and the Odd Changeover Switch are both in the up position, then effects send #1 is selected. Depressing only the Odd Effects Assign Switch changes the selection to effects #3.

10. Odd Changeover Switch -Depressing this button accesses the 5/7 (5 or 7) effects sends. With this switch down, and the Odd Effects Assign Switch in the up position, effects send #5 is selected. When both buttons are depressed, then effects send #7 is selected.

11. Effects Send - Even -The larger outer adjusts the level being sent to the selected "even" effects bus. This control is used in conjunction with the Even Effects Assign Switch (2,4,6, and 8).

12. Even Effects Assign Switch - When this button and the Even Changeover Switch are both in the up position, then effects send #2 is selected. Depressing only the Even Effects Assign Switch changes the selection to effects send #4.

13. Even Changeover Switch -Depressing this button accesses the 6/8 (6 or 8) effects sends. With this switch down and the Even Effects Assign Switch in the up position, effects send #6 is selected. When both buttons are depressed, then effects send #8 is selected.

   Now see the Effects Channel